Heli-max HMXE1008 User Manual download pdf

❏ 1. Position the blade as shown above and test ﬁ t the top

reinforcement on the blade.

❏ 2. Turn over the blade and test ﬁ t the bottom reinforcement.

❏ 3. Once you have veriﬁ ed everything ﬁ ts properly, mix up

some 30-minute epoxy and apply it to the exposed wood on

the root of the blade. Install the top and bottom reinforcements

as shown above. Double check your work to verify the

reinforcements are installed properly. Install and tighten the

two 2.6mm screws into the reinforcements as shown.

❏ 4. Use a paper towel dampened with isopropyl alcohol to

remove the excess glue from the blade. Before the epoxy sets,

install the blades into the grips to clamp the reinforcements

down onto the blade. Once the epoxy has set, you can

proceed to use the blades.

Warning: The blade root reinforcements must be glued to the main blades. Please inspect the blades for damage before

assembling them. Do not exceed 1700 RPM with the wood blades or failure may occur. Blades are considered consumable

items and should be discarded if there is any sign of damage.

600mm MAIN ROTOR BLADES

INSTRUCTIONS

1 2

600mm MAIN ROTOR BLADES 1

Summary of Contents

Page 1 - 600mm MAIN ROTOR BLADES

❏ 1. Position the blade as shown above and test ﬁ t the top reinforcement on the blade.❏ 2. Turn over the blade and test ﬁ t the bottom reinforcement.

Page 2

BLADE BALANCINGNote: All main blades must be balanced before use. We recommend using the Heli-Max Blade Balancer (HMXR4855).❏ 1. Apply the two colored

Comments to this Manuals

No comments

Heli-max HMXE1008 User Manual

Browse online or download User Manual for Air equipment Heli-max HMXE1008. Heli-Max HMXE1008 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Heli-max HMXE1008